A & V Enterprises

The body made of mild steel duly finished powder coated paint and mounted with a stainless steel top

Stirring is done by fractional horsepower motor, rotating magnetic field applied below the liquid container

The stirring by a PTFE encapsulated magnetic needle placed in the liquid to be stirred.

Complete with pilot lamp, plug cord and continuously variable speed regulator.

Max. Speed 1400 RPM.

Workable on 220V AC single phase.

Supplied with one magnetic needle.

·         An ideal Unit for use on small animals, combining many features of the expensive research units
·        A rugged ‘U’ frame to which is fixed a three dimensional electrode manuplateor, The frame is mounted on a sturdy base plate at a convenient elevated position
·        The lateral and vertical travel is read on micrometer heads to 0.05mm. Screws have 2mm,per revolution. The calibrated 80mm. A-P traverse is read on a vernier to 0.1mm. The unit is fitted with an universal joint with calibration in vertical and horizontal planes providing access from any angle. The end of the lateral slide has V groove, to take the electrode holder.
·        The Ear Bar slots on the frame have 0.1mm. Verniers for ease in centring the animals
·        The frame has sufficient width to take animals upto the size of rats.
·        Rat adapter with vertical adjustment, 10mm on each side of zero, One set of Ear bars calibrated in mm.
Three sets of ear caps of different types and sizes with wire to slip on the bars for different sizes of animals.

• Bulk density Apparatus uses glass sections, for test, programmable unit for adjusting the measurements, temperature and other settings.
• Bulk density Apparatus is used for testing the density of any product.
• Bulk Density Apparatus is specially designed to study the packing down of powder beds of different pharmaceuticals and chemicals powders, flakes, pellets, granules and other bulk substances.
• Bulk Density is an essential test required in the process of tablet manufacturing, Capsule filling and cosmetic manufacture.

Digital Laboratory Stirrer is a versatile tool that can be used in a variety of scientific experiments and procedures. It has a variable speed control that allows the user to set the RPM anywhere from 0-4000, which means it can be used for anything from doing simple mixing tasks to more complex chemical reactions. The stirring rod is made from stainless steel and is removable for easy cleaning. The unit comes with a power cord and an off/on the switch. It also has a built-in digital timer, which is not only helpful for timing tasks but makes sure you don't accidentally leave the unit on when you are finished using it.

This is a powerful tool used in chemistry labs. It is important to be aware of the potential hazards that laboratory equipment may pose to health and safety, and proper procedures should always be followed when operating this product.

This is a critical component for many chemistry labs. This tool comes in handy when you need to combine different reagents to make a new chemical compound. The stir bar of this unit can reach a temperature of up to 130 degrees Celsius, which is especially helpful if you need to mix in things that tend to heat up faster than others. It comes with a cooling fan that stops the stirring bar from melting.

• It is professionally designed for the leakage tests of packages food, drugs, medical instruments, daily chemical products, cars, electronics components, stationeries and other industrial products.

• The instrument also can be used to test seal performance of specimens after falling and compression tests.

• It will be supply with Vacuum Pump & Timer.

• Range of Measurement :- 0' to 360'
• Vernier movable on the scale enable reading of optical rotation to 60sec
• It is used in medical, pharmaceutical and chemical research laboratories
• Best Quality, Best Price, Fast & Free Delivery
• A corning glass tube is enclosed in a circular aluminium tube with top door for access & exclusion of external light.

• Flask Holder: Spring type clamp arrangement with easy interchangeability facility.
• Temp. Controlled by digital Temp. Controller cum indicator with accuracy of ±0.50C
• Temp. Range 100C to 600C in cooling Model & in heating Model 50C above ambient to 600C.
• Cooling by CFC free hermetically sealed compressor
•  Heating by 'U' Type tubular S. S. Heater
•  Illumination light to view.

• 9 x 250 ml
• 9 x 250 ml 
• 25 x 250 ml 
• 9 x 500 ml 
• 16 x 500 ml 
• 25 x 500 ml

Tissue homogenizer which is extensively used in vast applications pertaining to mixing, emulsification, shredding, or chopping. This homogenizer can rapidly emulsify, disrupt and homogenize liquids. Incorporates with a high speed motor, we have manufactured this range as per the industrial standards.

• Used for uniform heating/boiling of glass flasks
• Auto cut off as the desired temperature is reached
• Heat resistant aluminum body and powder coated paint
• Suitable for heating flasks
• Provision of fuse and buffers for safe and smooth operation

STUDENT ORGAN BATH (DOUBLE UNIT)

A Perspex organ bath with fine thermostatic temperature control, electronic stirrer and complete set of accessories, making it a versatile unit for all research work. Bath 12”×9”×8”, with leak proof dovetailed joints, resting in sturdy metal frame; top of the bath carries a 1”×3/8” hick band, for fixing accessories, inside the bath is a metal sheathed heating element (easily replicable) controlled by means of a fine adjustable thermostat with sensitivity ±1°c. The stirrer unit is completely independent and dips in the bath in one corner, fixing on its special stainless steel upright. A M.S. Junction box is fitted to the bath frame and carries all the electrical leads and connections two pilot lamps indicate functioning of the thermostat and stirrer.

Standard components are:

Double set or glass inner vessels

Oxygen tubes

Warming coils

Two stainless steel capillary levers

Four stainless steel uprights with boss heads

X  block